Question about the Mounting hardware for 26-27 headlights
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Reno Speedster
Topic author - Posts: 620
- Joined: Tue May 26, 2020 6:23 pm
- First Name: Morgan
- Last Name: Blanchard
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Speedster Project, 1922 Runabout Pickup
- Location: Anchorage, Alaska
Question about the Mounting hardware for 26-27 headlights
I am working on light mounts for my 26 speedster. I don’t have the mounting hardware. The critical part as I understand it is a washer with a convex top that matches the concave shape on the lamp itself. Can anyone post a picture of the washer, tell me how big around it is, and tell me the diameter of the bolt that goes through it?
-
Dan Hatch
- Posts: 5331
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Question about the Mounting hardware for 26-27 headlights
Is it the same washer as the one on the muffler?
-
DanTreace
- Posts: 4023
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff pickup, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: Question about the Mounting hardware for 26-27 headlights
The T-6509X headlamp bracket conical washer should fit the radius of the T-6517X '26-'27 headlamp tie rod and bracket.
Here are the mounting pieces.
The conical washer goes under the bracket to allow the swivel action. Don’t heavily paint as the lamp needs ground thru the bracket to the fender and then to the frame.
Here are the mounting pieces.
The conical washer goes under the bracket to allow the swivel action. Don’t heavily paint as the lamp needs ground thru the bracket to the fender and then to the frame.
- IMG_2393 (501x535).jpg (143.29 KiB) Viewed 208 times
Last edited by DanTreace on Sun Dec 07, 2025 1:58 pm, edited 1 time in total.
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Reno Speedster
Topic author - Posts: 620
- Joined: Tue May 26, 2020 6:23 pm
- First Name: Morgan
- Last Name: Blanchard
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Speedster Project, 1922 Runabout Pickup
- Location: Anchorage, Alaska
Re: Question about the Mounting hardware for 26-27 headlights
Perfect, thanks!