New Cantrell-Miller pullers - The Last of the Mohicans
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
New Cantrell-Miller pullers - The Last of the Mohicans
Last Cantrell-Miller Bearing Race Pullers ready for packing and headed out the door. This was a very rewarding project. Now, on to the next challenge...
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: New Cantrell-Miller pullers - The Last of the Mohicans
Stellar endeavor there, Scott ! The C.M. puller makes a tough job rather effortless.
-
- Posts: 2264
- Joined: Sat Mar 09, 2019 2:05 am
- First Name: Brent
- Last Name: Burger
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT closed cab flatbed
- Location: Spokane, Wa.
- Board Member Since: 2014
Re: New Cantrell-Miller pullers - The Last of the Mohicans
" .... headed out the door .... "
Do tell, .... where are they going ?
Do tell, .... where are they going ?
More people are doing it today than ever before !
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: New Cantrell-Miller pullers - The Last of the Mohicans
Thank you, Steve
Burger, as far as where they are going, #1 is staying with me, #2,3 went out to buyers last month and #4,5 going out to buyers when checks arrive. My batch run was 5 units, and 4 people expressed an interest in them, so that worked out very well indeed.
Burger, as far as where they are going, #1 is staying with me, #2,3 went out to buyers last month and #4,5 going out to buyers when checks arrive. My batch run was 5 units, and 4 people expressed an interest in them, so that worked out very well indeed.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 1413
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
Re: New Cantrell-Miller pullers - The Last of the Mohicans
Scott, do not forget the "dummy axle" part of the tool that you made for me to complete my original tool that was missing its "dummy axle" Thanks to Scott another original tool is complete and back in service.
-
- Posts: 2264
- Joined: Sat Mar 09, 2019 2:05 am
- First Name: Brent
- Last Name: Burger
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT closed cab flatbed
- Location: Spokane, Wa.
- Board Member Since: 2014
Re: New Cantrell-Miller pullers - The Last of the Mohicans
Bummer. How did I miss this ?
Sounds like another case of showing up at the depot after the train has already left.
My heart is filled with sadness ...
Sounds like another case of showing up at the depot after the train has already left.
My heart is filled with sadness ...
More people are doing it today than ever before !