All the Best,
Hank
FS Front Lowering Bracket Kit
-
Henry K. Lee
Topic author - Posts: 5474
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Life Member: YES
FS Front Lowering Bracket Kit
Ready to go, $175.00 shipped to your door. Email if interested. Only two left!
All the Best,
Hank
All the Best,
Hank
-
Model T Tom
- Posts: 430
- Joined: Mon Jan 07, 2019 9:26 pm
- First Name: Thomas
- Last Name: Butterworth
- * REQUIRED* Type and Year of Model Ts owned: 1911 speedster
- Location: Florida
Re: FS Front Lowering Bracket Kit
Looks a little thin for a suicide front end set up . but will work for stock T set up .
-
Henry K. Lee
Topic author - Posts: 5474
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Life Member: YES
Re: FS Front Lowering Bracket Kit
Well, it is made from 4400 series steel so thinner is a ok!
Hank
Hank
-
Jonathan.2909
- Posts: 30
- Joined: Sun Aug 13, 2023 9:54 pm
- First Name: Jonathan
- Last Name: Sinclair
- * REQUIRED* Type and Year of Model Ts owned: 1921 Model T Coupe
- Location: Detroit, Michigan
- Board Member Since: 2023
Re: FS Front Lowering Bracket Kit
Hi, I know that it’s an old thread but I have a question as I am building my first T and Speedster. It looks to be a piece of billet aluminum or steel in the lower mounting bracket right under where the crank goes, what’s that for and do you have any available still?
-
Jerry VanOoteghem
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: FS Front Lowering Bracket Kit
Henry no longer participates on this forum. I believe the hunk of steel/aluminum is only there as a temporary filler piece used to hold everything in place for the photo.
He might still get an email if you send it through the forum "contact" icon.
He might still get an email if you send it through the forum "contact" icon.
-
Craig Leach
- Posts: 1906
- Joined: Tue Jan 08, 2019 12:22 am
- First Name: craig
- Last Name: leach
- * REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
- Location: Laveen Az
Re: FS Front Lowering Bracket Kit
Hi Johnathan,
That piece fits inside the front cross member
To support it so it will not collapse because there is no spring in the U part of the cross member with the lowering bracket installed. I you go to north west vintage speedsters web site there is a section on lowering speedsters you will find detailed drawing of some of these lowering mounts along with many other ideas.
Craig.
That piece fits inside the front cross member
To support it so it will not collapse because there is no spring in the U part of the cross member with the lowering bracket installed. I you go to north west vintage speedsters web site there is a section on lowering speedsters you will find detailed drawing of some of these lowering mounts along with many other ideas.
Craig.
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: FS Front Lowering Bracket Kit
all goneHenry K. Lee wrote: ↑Sat Nov 16, 2019 5:23 pmReady to go, $175.00 shipped to your door. Email if interested. Only two left!
IMG_1564.jpeg
IMG_1565.jpeg
IMG_1566.jpeg
All the Best,
Hank
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger