Does anyone know what the inside diameter of a reverse drum bushing would be reamed to when new.
I need the measurement after the bushing is installed and reamed.
I'm not at home to look it up in my books. So far I have had no luck online.
I have found what I think is a NOS reverse drum. If the busing in it measures as a NOS measurement, it will help confirm my idea of the drum being NOS .
Thanks
Inside dimension of reverse drum bushing
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
DanTreace
- Posts: 3813
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: Inside dimension of reverse drum bushing
Vic Zannis rebuild book states original dimension of the Reverse Drum bushing as 2.302"
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
dobro1956
Topic author - Posts: 1413
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
Re: Inside dimension of reverse drum bushing
Thanks Dan. My bushing is 2.303. It is the same at both ends. That's close enough to make me think it's NOS. Two different people can easily be .001 difference due to technique or equipment differences.