Metal Pickup Bed
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
dang.1922
Topic author - Posts: 56
- Joined: Sun May 19, 2019 9:20 pm
- First Name: Dan
- Last Name: Greger
- Location: Dayton
Metal Pickup Bed
I have an all metal aftermarket bed that I installed on our 1922 roadster, and would like to know who and what year it was made. I have looked at many pictures of accessory beds and have not seen an all metal one. This is not a dump bed and it is a factory made one for the earlier Model T's. Any information anyone has I would appreciate. Dan
-
DanTreace
- Posts: 3813
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
- Location: North Central FL
- Board Member Since: 2000
- Contact:
Re: Metal Pickup Bed
Dan
That sure is a nice commercially made steel bed.
All I could find is a photo very similar to your steel bed, July issue 1921 Ford Owner and Dealer magazine. The photo was in an article on beds for runabouts, showed kits, boxes, and custom bodies for carting goods on the small T chassis, instead of the TT.
Here is the photo, just no description in the article about it, doesn't mention any mfg. names in the other pictures of wood bed kits or box bodies. All mention is just the photo caption.
July 1921
close up:
Could only guess at mfg..but Martin-Perry was making new all metal bodies in '21 so that bed might be that brand.
That sure is a nice commercially made steel bed.
All I could find is a photo very similar to your steel bed, July issue 1921 Ford Owner and Dealer magazine. The photo was in an article on beds for runabouts, showed kits, boxes, and custom bodies for carting goods on the small T chassis, instead of the TT.
Here is the photo, just no description in the article about it, doesn't mention any mfg. names in the other pictures of wood bed kits or box bodies. All mention is just the photo caption.
close up:
Could only guess at mfg..but Martin-Perry was making new all metal bodies in '21 so that bed might be that brand.
- 5A544DCF-46FC-4B80-8CC7-1A7F52189CFA.jpeg (59.48 KiB) Viewed 2031 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
dang.1922
Topic author - Posts: 56
- Joined: Sun May 19, 2019 9:20 pm
- First Name: Dan
- Last Name: Greger
- Location: Dayton
Re: Metal Pickup Bed
Thank You Dan for the information, I have been looking for anything about a bed like this for a long time and found nothing. A friend of mine found this when we first got the roadster and I traded for it. It was on a T roadster frame that someone cut off at the front body mounts and bent in to make a trailer out of it. still had the rear end under it with a license plate bracket still on what was left of the wood turtle deck frame. ---Dan