For sale; 290 cam for $290

Post parts wanted or for sale here

Topic author
Adam
Posts: 1550
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
Board Member Since: 2000

For sale; 290 cam for $290

Post by Adam » Fri Oct 28, 2022 4:31 pm

Here is a used re-ground cam. I checked one lobe and it shows about .287” lift, so maybe that’s what they ground it to, or maybe it was originally .290 and has .003 wear. I have no idea who ground it or any other specifics. It was in an engine I bought for parts. Includes bearings in picture and the bronze rear bearing that was in the block with it. First $290 plus shipping gets it. Inside the USA only, please. Email if you want it. Include your address so I can figure shipping. I don’t get pm’s and might not see a post here. Thanks.

B5CC75EE-AC44-497C-A6F0-B3D58E6828A2.jpeg
A8FEF28E-6B18-4E1B-B310-5A06078BBB97.jpeg


ModelTMark
Posts: 76
Joined: Sun Jan 27, 2019 9:39 pm
First Name: Mark
Last Name: Williams
* REQUIRED* Type and Year of Model Ts owned: 1924 TT, 1923 Touring, 1927 Tudor, 1915 Roadster
Location: Virginia
Board Member Since: 1999

Re: For sale; 290 cam for $290

Post by ModelTMark » Wed Nov 02, 2022 9:13 pm

Adam,

I don't believe that's how you measure the lift of a camshaft. It's a ratio calculated by the lobe nose to heel measurement minus the measurement of the base circle.

R/Mark


Jerry VanOoteghem
Posts: 4082
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan

Re: For sale; 290 cam for $290

Post by Jerry VanOoteghem » Thu Nov 03, 2022 10:28 am

ModelTMark wrote:
Wed Nov 02, 2022 9:13 pm
Adam,

I don't believe that's how you measure the lift of a camshaft. It's a ratio calculated by the lobe nose to heel measurement minus the measurement of the base circle.

R/Mark
If he zeroed his indicator on the base circle, then what he shows & states is correct.


Topic author
Adam
Posts: 1550
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
Board Member Since: 2000

Re: For sale; 290 cam for $290

Post by Adam » Thu Nov 03, 2022 11:01 am

Please ignore the comment by Modeltmark, he doesn’t understand what he’s looking at. Jerry did get it correct. Thanks Jerry. It IS exactly what it IS.

User avatar

Tallpaul
Posts: 9
Joined: Wed Dec 18, 2019 10:15 pm
First Name: Paul
Last Name: Allen
* REQUIRED* Type and Year of Model Ts owned: 1923
Location: California
Board Member Since: 2016

Re: For sale; 290 cam for $290

Post by Tallpaul » Sun Nov 13, 2022 10:32 pm

Adam, is your .290 cam still for sale?


Topic author
Adam
Posts: 1550
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
Board Member Since: 2000

Re: For sale; 290 cam for $290

Post by Adam » Mon Nov 14, 2022 10:26 am

Adam wrote:
Fri Oct 28, 2022 4:31 pm
Email if you want it. Include your address so I can figure shipping. I don’t get pm’s and might not see a post here. Thanks.
Still available. $290 plus shipping gets it.


Topic author
Adam
Posts: 1550
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
Board Member Since: 2000

Re: For sale; 290 cam for $290

Post by Adam » Tue Nov 15, 2022 4:37 pm

To the top

Post Reply Previous topicNext topic