Cowl Vent
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
johnernst
Topic author - Posts: 40
- Joined: Sat Aug 21, 2021 7:09 pm
- First Name: John
- Last Name: Ernst
- * REQUIRED* Type and Year of Model Ts owned: 1922 Canadian Touring
- Location: Edmonton Alberta
Cowl Vent
My recently acquired 1927 Model TT truck has the front cowl air vent. It seems the knob/handle on the inside of the cab is missing and Im not sure what it looked like when it was new. Does anyone have ideas, pics of how i can restore this to something that is original. Thanks John Ernst
- Attachments
-
-
-
-
Scott_Conger
- Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: Cowl Vent
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
johnernst
Topic author - Posts: 40
- Joined: Sat Aug 21, 2021 7:09 pm
- First Name: John
- Last Name: Ernst
- * REQUIRED* Type and Year of Model Ts owned: 1922 Canadian Touring
- Location: Edmonton Alberta
Re: Cowl Vent
Ok thanks for the link to that previous thread. That helps. I will just fashion something from around the shop
John E
John E