large u-joint grease cup

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
bobt
Posts: 288
Joined: Tue Aug 13, 2019 5:43 am
First Name: Robert
Last Name: Thompson
* REQUIRED* Type and Year of Model Ts owned: 1915 touring 1926 roadster
Location: virginia

large u-joint grease cup

Post by bobt » Thu Apr 30, 2020 6:06 am

My friend and I were working on our Ts yesterday and while he was lubing the large grease cup on the U-joint he noticed the large prong? in the center of the cap and wondered what it was for. I removed the top of my cup and it also had one. We can not figure what its for. HELP! Thanks, bobt
Top
User avatar

CudaMan
Posts: 2531
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
Board Member Since: 2013

Re: large u-joint grease cup

Post by CudaMan » Thu Apr 30, 2020 8:48 am

Maybe it's a period aftermarket cap with a ratchet feature?

http://www.mtfca.com/discus/messages/50 ... 1430790748

http://www.mtfca.com/discus/messages/70 ... 1491688605
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Top
User avatar

DanTreace
Posts: 3813
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
* REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
Location: North Central FL
Board Member Since: 2000
Contact:
Contact DanTreace

Re: large u-joint grease cup

Post by DanTreace » Thu Apr 30, 2020 8:49 am

That prong is a feature of the Empress brand dope cup cap. The base should have a spring clip, the prong tightens into it to keep the cap from vibrating and un-screwing as your T shakes and wiggles down the road :lol:


If the base is missing the spring, could be the cap was a replacement. The Empress brand was std. on the Fordson too.

IMG_0751 (1280x1088) (550x468).jpg
IMG_0751 (1280x1088) (550x468).jpg (129.26 KiB) Viewed 2742 times
IMG_8755 (580x435).jpg
IMG_8755 (580x435).jpg (128.63 KiB) Viewed 2742 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Top

Original Smith
Posts: 3699
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
* REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
Location: Lomita, California
MTFCA Life Member: YES

Re: large u-joint grease cup

Post by Original Smith » Thu Apr 30, 2020 10:29 am

Every T I've owned has had one of those.
Top

Adam
Posts: 1550
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
Board Member Since: 2000

Re: large u-joint grease cup

Post by Adam » Thu Apr 30, 2020 12:23 pm

These were standard on the TT rear axle outer bearings.
Top
User avatar

Rich Eagle
Posts: 6895
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID

Re: large u-joint grease cup

Post by Rich Eagle » Thu Apr 30, 2020 3:17 pm

There were a number of designs for retaining the cups. I have never lost one on a T but have on another vehicle. I wonder how big a problem this was or was it just a sales ploy?
GreesKupzz.jpg
When did I do that?
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”